When you need to cut pipes on construction sites, sometimes can happen that the access to the electricity can be difficult, or even worse, none-existent. Then you will appreciate a reliable device that is independent on the electrical connection. We introduce the EX-TRACK® PA-1, portable pipe cutter from Thermacut®.

EX-TRACK®PA-1 is a portable cutting system designed for cutting mild steel tubes using an oxy-fuel torch. With this device you can cut pipes up to 600 mm diameter (with the supplied chain) and with wall thicknesses up to 90 mm. The entire cutting process is manually controlled by an operator. As a big advantage we see that no electricity is needed.

The EX-TRACK®PA-1 is a handy cutting tool for use on construction sites, and in workshops, where pipes need to be cut, make a bevel, etc. A flashback arrestor protects the device from flashback and damage.

After installation of two larger wheels (included in the package), you can even cut tubes with diameters smaller than 108 mm, in diameter down to 80 mm. Just swap the wheels. The clutch leveler allows you to quickly move the device onto the desired cutting spot.

Cutting tubes with EX-TRACK® PA-1 is much faster than cutting with a standard grinder and the cut surface is much smoother. The whole device is easy to assemble and it’s easy to use.

JUST MOUNT IT AND CUT PIPES.

Check out the video with an installation guide, step by step:

Download your brochure, operating manual, and fact sheet at www.ex-track.com.

---

Want to know more about the EX-TRACK®? Visit our website www.ex-track.com.

Text:               Thermacut, k.s.
Photo:            Archive of Thermacut, k.s.